Buzzrack

 ₱ 8,000.00

• The BUZZYBEE H2 sits high on the hitch, well clear of speed bumps and other hazards such as steep ferry ramps.
• Dimensions: 88cm wide x 77cm deep
• Weight: 7.8kg (17.2lbs)
• Reflective red stickers on the wheel supports
• The build quality – tube bending, welding, rust proofing, painting, component quality, is exemplary. The whole carrier looks and feels like the class act it is. All tools you might need are provided.
• All parts are replaceable if e.g. someone forgets that a tow bar carrier is fitted and reverses into a wall – which happens!

 ₱ 14,500.00 

• The Eazzy H2 sits high, well clear of speed bumps and other hazards such as steep ferry ramps.
• It fits 1 1/4″ and 2″ hitch receivers. The aluminum adapter for 2″ receivers allows a strong and secure fit. The locking hitch bolt prevents rattling. The locking is protected by a waterproof cap.
• Weight: 13kg (27lbs)
• The build quality – tube bending, welding, rust proofing, painting, component quality, is exemplary. The whole carrier looks and feels like the class act it is. All tools you might need are provided.

  ₱ 15,000.00

• The Eazzy H3 is entirely suitable for carbon frame bikes; the rubber-padded bike frame cradles rotate 360 degrees and, again using rubber-padded straps, they hold any type of tube firmly but gently.
• The wheel holders will accommodate all wheelbases, even small children’s bikes
• The long wheel rubber-padded wheel straps hold tyres up to 3.25” wide; pull on them to tighten, and use the quick release to loosen
• The maximum permitted load is 60kg (132lbs), with no bike weighing more than 20kg (44lbs)
• Electric bikes up to 20kg may be carried, although the Eazzy series is not optimised for e-bikes (see E-Scorpion for e-bikes); the down tube size is limited to 75mm diameter (3″); whatever bikes you have, always load the heaviest bikes nearest to the car
• There is a built in locking cable to secure your bikes; as usual with cable locks, it’s a deterrent only.

 ₱ 13,000.00 

• The BUZZYBEE H4 is entirely suitable for carbon frame bikes; the rubber bike frame pads and high resistance straps hold any type of tube firmly but gently.
• The wheel holders will accommodate all wheelbases, even small children’s bikes. You can reverse the wheel supports for the really small bikes.
• The long rubber-padded wheel straps hold tires up to 3.25” wide; pull on them to tighten, and use the quick release to loose.
• The maximum permitted load is 60kg (132lbs), with no bike weighing more than 20kg (44lbs)
• Electric bikes up to 20kg may be carried, although the BUZZYBEE series is not optimised for e-bikes (see E-Scorpion for e-bikes); the down tube size is limited to 75mm diameter (3″); whatever bikes you have, always load the heaviest bikes nearest to the car

  ₱ 13,500.00 

• THE PLATFORM

The BUZZRUNNER H2 can carry up to 2 bikes on a solidly built platform. It fits 1.25″ and 2″ hitch receivers. The product was tested in accordance to the French standard XP R18-904-4

• FIT TO THE CAR

Whatever hitch receiver size your car is equipped with, 1.25″ or 2″, the BuzzRunner will fit. The adapter is included.

• LOCKS TO THE HITCH

The BuzzRunner H2 comes with a locking anti-sway bolt. This will prevent most of the rattling coming from the rack while driving.

• WHEEL SUPPORTS

The wheel holders will accommodate all wheelbases, even very small children’s bikes.
The ratchet straps allow a quick and secure attachment of the wheels.
The straps are long enough to hold the biggest rims.

• LOCKING CLAMP

The clamps are big enough to fit most bike frames.
Made of reinforced Nylon, the clamps are highly resistant. An integrated pad prevents scratching the bike paint and allow most brakes cables to go through.
Each clamp is equipped with a locking knob.

• TILTING

Genuinely easy to tilt, well balanced during the tilting phase,and tilts far enough for gate access.
In the case of some very specific cars, a tilting kit is available as an option to allow a more angled tilt.

  ₱ 15,000.00 

• THE PLATFORM

The BUZZRUNNER H3 can carry up to 3 bikes on a solidly built platform. It fits 1.25″ and 2″ hitch receivers. The product was tested in accordance to the French standard XP R18-904-4

• FIT TO THE CAR

Whatever hitch receiver size your car is equipped with, 1.25″ or 2″, the BuzzRunner will fit. The adapter is included.

• LOCKS TO THE HITCH

The BuzzRunner H3 comes with a locking anti-sway bolt. This will prevent most of the rattling coming from the rack while driving.

• WHEEL SUPPORTS

The wheel holders will accommodate all wheelbases, even very small children’s bikes. The ratchet straps allow a quick and secure attachment of the wheels. The straps are long enough to hold the biggest rims.

• LOCKING CLAMP

The clamps are big enough to fit most bike frames. Made of reinforced Nylon, the clamps are highly resistant. An integrated pad prevents scratching the bike paint and allow most brakes cables to go through. Each clamp is equipped with a locking knob.

 TILTING

Genuinely easy to tilt, well balanced during the tilting phase, and tilts far enough for gate access. In the case of some very specific cars, a tilting kit is available as an option to allow a more angled tilt.